Hot Rolled Z-Shaped Water-Stop Steel Sheet Pile/ Piling Plate
PRODUCT PRODUCTION PROCESS
The production process of az sheet pile usually includes the following steps:
Raw material preparation: First, raw materials need to be prepared, usually using high-quality steel as raw materials. These steels need to be inspected and classified to ensure they meet production requirements.
Heating and rolling: The raw materials are heated to bring them to the appropriate temperature and then rolled through the rolling mill. In this process, the steel is processed into a Z-shaped shape and rolled through multiple passes through different rollers to ensure that the shape and size of the final product meet standard requirements.
Cooling and shaping: After rolling, the steel needs to be cooled to stabilize its structure and properties. At the same time, shaping and trimming are also required to ensure that the product has a smooth surface and accurate dimensions.
Inspection and packaging: The completed Hot Rolled Z Type Steel Pile need to undergo strict quality inspection, including inspection of appearance quality, dimensional deviation, chemical composition, etc. Qualified products will be packed and ready to be shipped.
Factory and transportation: The final product will be loaded onto the truck and shipped out of the factory, ready to be shipped to the customer site for use. Care must be taken to protect the product during transportation to avoid damage.
The above is the general production process of Z-shaped steel sheet piles. The specific production process may vary depending on the manufacturer and equipment.
*Send the email to chinaroyalsteel@163.com to get a quotation for your projects
| Section | Width | Height | Thickness | Cross Sectional Area | Weight | Elastic Section Modulus | Moment of Inertia | Coating Area (both sides per pile) | ||
|---|---|---|---|---|---|---|---|---|---|---|
| (w) | (h) | Flange (tf) | Web (tw) | Per Pile | Per Wall | |||||
| mm | mm | mm | mm | cm²/m | kg/m | kg/m² | cm³/m | cm4/m | m²/m | |
| CRZ12-700 | 700 | 440 | 6 | 6 | 89.9 | 49.52 | 70.6 | 1,187 | 26,124 | 2.11 |
| CRZ13-670 | 670 | 303 | 9.5 | 9.5 | 139 | 73.1 | 109.1 | 1,305 | 19,776 | 1.98 |
| CRZ13-770 | 770 | 344 | 8.5 | 8.5 | 120.4 | 72.75 | 94.5 | 1,311 | 22,747 | 2.2 |
| CRZ14-670 | 670 | 304 | 10.5 | 10.5 | 154.9 | 81.49 | 121.6 | 1,391 | 21,148 | 2 |
| CRZ14-650 | 650 | 320 | 8 | 8 | 125.7 | 64.11 | 98.6 | 1,402 | 22,431 | 2.06 |
| CRZ14-770 | 770 | 345 | 10 | 10 | 138.5 | 83.74 | 108.8 | 1,417 | 24,443 | 2.15 |
| CRZ15-750 | 750 | 470 | 7.75 | 7.75 | 112.5 | 66.25 | 88.34 | 1,523 | 35,753 | 2.19 |
| CRZ16-700 | 700 | 470 | 7 | 7 | 110.4 | 60.68 | 86.7 | 1,604 | 37,684 | 2.22 |
| CRZ17-700 | 700 | 420 | 8.5 | 8.5 | 132.1 | 72.57 | 103.7 | 1,729 | 36,439 | 2.19 |
| CRZ18-630 | 630 | 380 | 9.5 | 9.5 | 152.1 | 75.24 | 119.4 | 1,797 | 34,135 | 2.04 |
| CRZ18-700 | 700 | 420 | 9 | 9 | 139.3 | 76.55 | 109.4 | 1,822 | 38,480 | 2.19 |
| CRZ18-630N | 630 | 450 | 8 | 8 | 132.7 | 65.63 | 104.2 | 1,839 | 41,388 | 2.11 |
| CRZ18-800 | 800 | 500 | 8.5 | 8.5 | 127.2 | 79.9 | 99.8 | 1,858 | 46,474 | 2.39 |
| CRZ19-700 | 700 | 421 | 9.5 | 9.5 | 146.3 | 80.37 | 114.8 | 1,870 | 39,419 | 2.18 |
| CRZ20-700 | 700 | 421 | 10 | 10 | 153.6 | 84.41 | 120.6 | 1,946 | 40,954 | 2.17 |
| CRZ20-800 | 800 | 490 | 9.5 | 9.5 | 141.2 | 88.7 | 110.8 | 2,000 | 49,026 | 2.38 |
Section Modulus Range
1100-5000cm3/m
Width Range (single)
580-800mm
Thickness Range
5-16mm
Production Standards
BS EN 10249 Part 1 & 2
Steel Grades
S235JR, S275JR, S355JR, S355JO
ASTM A572 Gr42, Gr50, Gr60
Q235B, Q345B, Q345C, Q390B, Q420B
Others available on request
Length
35.0m maximum but any project specific length can be produced
Delivery Options
Single or Pairs
Pairs either loose, welded or crimped
Lifting Hole
Grip Plate
By container (11.8m or less) or Break Bulk
Corrosion Protection Coatings
|
Product Name
|
|||
|
MOQ
|
25 Ton
|
||
|
Standard
|
AISI,ASTM,DIN,JIS,GB,JIS,SUS,EN,etc.
|
||
|
Length
|
1-12m or as Your Requirement
|
||
|
Width
|
20-2500 mm or as Your Requirement
|
||
|
Thickness
|
0.5 - 30 mm or as Your Requirement
|
||
|
Technique
|
Hot rolled or cold rolled
|
||
|
Surface Treatment
|
Clean, blasting and painting according to customer requirement
|
||
|
Thickness tolerance
|
±0.1mm
|
||
|
Material
|
Q195; Q235(A,B,C,D R); Q345(B,C,D R); Q345QC Q345QD SPCC SPCD SPCD SPCE ST37 ST12 ST15 DC01 DC02 DC03 DC04 DC05 DC06 20#- 35# 45#
50#, 16Mn-50Mn 30Mn2-50Mn2 20Cr, 20Cr, 40Cr 20CrMnTi 20CrMo;15CrMo;30CrMo 35CrMo 42CrMo; 42CrMo4 60Si2mn 65mn 27SiMn ;20Mn; 40Mn2; 50Mn; 1cr13 2cr13 3cr13 -4Cr13; |
||
|
Application
|
It is widely used in small tools, small components, iron wire, siderosphere, pull rod, ferrule, weld assembly, structural metal,
connecting rod, lifting hook, bolt, nut, spindle, mandrel, axle, chain wheel, gear, car coupler. |
||
|
Export packing
|
Waterproof paper, and steel strip packed.Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
|
||
|
Application
|
Shipbuilding,marine steel plate
|
||
|
Certificates
|
ISO,CE
|
||
|
Delivery Time
|
Usually within 10-15 days after receipt of advance payment
|
||
The height (H) of nz26 sheet pile usually ranges from 200mm to 600mm.
The width (B) of Q235b Z-shaped steel sheet piles usually ranges from 60mm to 210mm.
The thickness (t) of Z-shaped steel sheet piles usually ranges from 6mm to 20mm.
Application
Z steel sheet piles have a wide range of applications in civil engineering and construction. Some common applications include:
- Retaining walls: pz 27 sheet pile are commonly used in the construction of retaining walls to stabilize and support soil or other materials at different elevations. They provide a secure barrier against soil erosion and lateral pressure while allowing for efficient installation and removal if needed.
- Cofferdams: Z steel sheet piles are frequently used to create temporary cofferdams for construction projects in bodies of water. The interlocking design of the piles ensures a watertight seal, allowing for dewatering and enabling construction activities to take place in a dry working area.
- Deep excavations: Z steel sheet piles are used to support deep excavations, such as for building basements or underground structures. They provide structural stability, prevent soil movement, and serve as a protective barrier against water seepage into the excavation area.
- Flood protection: Z steel sheet piles are often utilized in flood protection systems to reinforce and secure riverbanks, levees, and other flood mitigation structures. The strength and impermeability of the piles help resist the forces exerted by water, preventing erosion and ensuring the integrity of flood control measures.
- Waterfront structures: Z steel sheet piles are commonly used in the construction of quay walls, jetties, marinas, and other waterfront structures. The piles provide stability and support, allowing for safe and efficient operation of vessels and port facilities.
- Bridge abutments: Z steel sheet piles are employed in bridge construction as abutments, providing support and stability to bridge foundations.
- Soil and slope stabilization: Z steel sheet piles are used for soil and slope stabilization, especially in areas prone to landslides or erosion. They can help prevent soil movement and provide stability to embankments, hillsides, and other slopes.
Packaging & Shipping
Packaging:
Stack the sheet piles securely: Arrange the Z-shaped sheet piles in a neat and stable stack, ensuring that they are aligned properly to prevent any instability. Use strapping or banding to secure the stack and prevent shifting during transportation.
Use protective packaging materials: Wrap the stack of sheet piles with a moisture-resistant material, such as plastic or waterproof paper, to protect them from exposure to water, humidity, and other environmental elements. This will help prevent rust and corrosion.
Shipping:
Choose a suitable mode of transportation: Depending on the quantity and weight of the sheet piles, select the appropriate mode of transportation, such as flatbed trucks, containers, or ships. Consider factors like distance, time, cost, and any regulatory requirements for transportation.
Use appropriate lifting equipment: To load and unload the U-shaped steel sheet piles, use suitable lifting equipment such as cranes, forklifts, or loaders. Ensure that the equipment used has sufficient capacity to handle the weight of the sheet piles safely.
Secure the load: Properly secure the packaged stack of sheet piles on the transportation vehicle using strapping, bracing, or other suitable means to prevent shifting, sliding, or falling during transit.
COMPANY STRENGTH
Made in China, first-class service, cutting-edge quality, world-renowned
1. Scale effect: Our company has a large supply chain and a large steel factory, achieving scale effects in transportation and procurement, and becoming a steel company that integrates production and services
2. Product diversity: Product diversity, any steel you want can be purchased from us, mainly engaged in steel structures, steel rails, steel sheet piles, photovoltaic brackets, channel steel, silicon steel coils and other products, which makes it more flexible Choose the desired product type to meet different needs.
3. Stable supply: Having a more stable production line and supply chain can provide more reliable supply. This is especially important for buyers who require large quantities of steel.
4. Brand influence: Have higher brand influence and larger market
5. Service: A large steel company that integrates customization, transportation and production
6. Price competitiveness: reasonable price
*Send the email to chinaroyalsteel@163.com to get a quotation for your projects
CUSTOMER VISIT PROCESS
When a customer wishes to visit a product, the following steps can usually be arranged:
Make an appointment to visit: Customers can contact the manufacturer or sales representative in advance to make an appointment for the time and place to visit the product.
Arrange a guided tour: Arrange professionals or sales representatives as tour guides to show customers the production process, technology and quality control process of the product.
Display products: During the visit, show products at different stages to customers so that customers can understand the production process and quality standards of the products.
Answer questions: During the visit, customers may have various questions, and the tour guide or sales representative should answer them patiently and provide relevant technical and quality information.
Provide samples: If possible, product samples can be provided to customers so that customers can more intuitively understand the quality and characteristics of the product.
Follow-up: After the visit, promptly follow up on customer feedback and needs to provide customers with further support and services.
FAQ
Q: Are you trading company or manufacturer ?
A: We are manufacturer, with own warehouse and trading company.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or 15-20 days if the goods are not in stock, according to order quantity.
Q: Do you provide samples ? Is it free or extra cost?
A: Yes, we provide the sample for free, customer affords freight charge.
Q: What about your MOQ?
A: 1 Ton is acceptable, 3-5 Tons for customized product.
Products categories
-
Custom Sheet Metal Parts Welding Parts Stamping...
-
Railroad Train ISCOR Steel Rail Steel Heavy Rail
-
GB Standard Non Oriented Electrical Silicon Ste...
-
Rail Track Heavy Steel Rail for Standard Railwa...
-
Chinese Rails With High Quality And Favorable P...
-
Factory Sale 1.6mm 500meter Stranded Electric W...